Product Categories
Interactive Whiteboard- Conference Interactive Whiteboard
- Teaching Interactive Whiteboard
- 55 Inch Conference Interactive Whiteboard
- 65 Inch Conference Interactive Whiteboard
- 75 Inch Conference Interactive Whiteboard
- 85 Inch Conference Interactive Whiteboard
- 98 Inch Conference Interactive Whiteboard
- 55 Inch Teaching Interactive Whiteboard
- 65 Inch Teaching Interactive Whiteboard
- 75 Inch Teaching Interactive Whiteboard
- 85 Inch Teaching Interactive Whiteboard
Online Service
- Contact Person: Ms. Yanjun Chen
- View Contact Details
Home > News > What are the daily maintenance precautions for the three roller gates of ZECHENG intelligent ESD access control system?
News
What are the daily maintenance precautions for the three roller gates of ZECHENG intelligent ESD access control system?
What are the precautions for daily maintenance of Esd Access Control System three roller gates?
1. During the card reading period, the user is strictly prohibited to squeeze, lean on, or push the brake lever before the traffic indicator turns green, so as not to affect the normal operation of the device.
2. When the equipment is not in use, it is strictly forbidden to sit or lean on the gate pole to avoid unnecessary damage to the gate.
3. Do not use the equipment directly in the open air or in a humid or corrosive environment, so as not to affect the service life of the equipment due to rain, moisture or corrosive substances. When the equipment is used outdoors, rain shelters such as awnings should be installed.
4. During passage, the user only needs to push the brake lever slightly, and do not force the brake lever to move during passage.
5. When the three-roller gate of the Esd Access Control system is powered off, people must not be under the gate rod, so as not to drop the rod and hurt people.
8. The outer shell of this equipment is 304# stainless steel. You must frequently scrub the exterior with a soft fabric to keep it clean and tidy. Do not scrub the exterior with hard objects to avoid scratches and affect the appearance. At the same time, it is forbidden to rinse with water to avoid short circuit of the electronic control system. Damage to the equipment.
9. Regularly check the connection of the various moving parts of the equipment. If loose nuts, screws and other fasteners are found, they should be tightened in time to avoid long-term operation and cause gate failure.
10. Regularly check the connection of the system protection ground to ensure its reliable access.
11. Regularly check the connectors and connection points of the connection line to ensure reliable connection.
12. In the process of using the ESD Access Control system three-roller turnstile, it is necessary to take care of the turnstile, forbid violent collisions, lean on, and knocks are strictly prohibited. Take good care of the turnstiles, do a good job of daily maintenance, and effectively reduce turnstiles and maintenance costs.
1. During the card reading period, the user is strictly prohibited to squeeze, lean on, or push the brake lever before the traffic indicator turns green, so as not to affect the normal operation of the device.
2. When the equipment is not in use, it is strictly forbidden to sit or lean on the gate pole to avoid unnecessary damage to the gate.
3. Do not use the equipment directly in the open air or in a humid or corrosive environment, so as not to affect the service life of the equipment due to rain, moisture or corrosive substances. When the equipment is used outdoors, rain shelters such as awnings should be installed.
4. During passage, the user only needs to push the brake lever slightly, and do not force the brake lever to move during passage.
5. When the three-roller gate of the Esd Access Control system is powered off, people must not be under the gate rod, so as not to drop the rod and hurt people.
6. Do not use this machine when there is lightning to prevent damage to the gate
8. The outer shell of this equipment is 304# stainless steel. You must frequently scrub the exterior with a soft fabric to keep it clean and tidy. Do not scrub the exterior with hard objects to avoid scratches and affect the appearance. At the same time, it is forbidden to rinse with water to avoid short circuit of the electronic control system. Damage to the equipment.
9. Regularly check the connection of the various moving parts of the equipment. If loose nuts, screws and other fasteners are found, they should be tightened in time to avoid long-term operation and cause gate failure.
10. Regularly check the connection of the system protection ground to ensure its reliable access.
11. Regularly check the connectors and connection points of the connection line to ensure reliable connection.
12. In the process of using the ESD Access Control system three-roller turnstile, it is necessary to take care of the turnstile, forbid violent collisions, lean on, and knocks are strictly prohibited. Take good care of the turnstiles, do a good job of daily maintenance, and effectively reduce turnstiles and maintenance costs.
